Nose Strips
Step 1: Start with a clean face. Thoroughly wet nose to activate adhesive.
Step 2: Peel plastic backing from strip and apply to nose, smooth side down. Press to ensure even contact with skin.
Step 3: Allow strip to dry in place for 10-15 minutes, until stiff.
Step 4: Gently peel off strip, starting at edges and pulling toward center.
Step 5: Rinse residue and gleefully inspect strip for evidence of gunk.
Hydrocolloid and Salicylic Acid Dots
Step 1: Make sure the affected area is clean. Peel appropriate-sized dot from plastic backing.
Step 2: Cover entire whitehead or blemish with dot, pressing to ensure even contact with skin.
Step 3: Allow dot to remain in place for 6-8 hours, or overnight.
Step 4: Remove and discard dot.
Step 5: Store your dots in the resealable storage pouches to keep them fresh!